Filter
Top Products
3
1
2
Installation Instructions
The following things should be checked before starting the
dishwasher:
STARTING THE
DISHWASHER
1
The dishwasher is level and fixed properly
2
The water inlet valve is open
3
There is no leakage at the connections of the conducts. (Conductors?)
4
The wires are tightly connected
5
The power is turned on
6
Make sure the inlet and drain hoses are not twisted
7
All packing materials and removable printings should be taken out from
the dishwasher
Care and maintenance
The filter prevents larger remnants of food or other objects from getting
inside the pump.
The filter system consists of a coarse filter, a flat (main filter) and a micro filter
(fine filter).
FILTERING
SYSTEM
Main filter
1
Food and soil particles trapped by this filter are pulverized by a special jet on the
spray arm and washed down to drain.
Fine filter
2
This filter holds soil and food residue in the sump area and
prevents it from being redeposited on the dishes during a wash cycle.
Course filter
3
Larger items, such as pieces of bone or glass, that could block the drain are
trapped in the coarse filter. To remove the items caught by the filter, gently
squeeze the tap on the top of this filter and lift it out.
FILTER ASSEMBLY
The filter efficiently removes food particles from the wash water, allowing it to be
recycled throughout a cycle. For best performance and results, the filter assembly
must be regularly cleaned. For this reason, it is a good idea to remove the larger
food particles trapped in the filter after each wash cycle by rinsing the filter and
cup under running water. To remove the filter assembly, pull upward on the cup
handle in the upward direction.
17