Filter
Top Products
5
Operating Instructions
PRIOR TO USING FOR THE FIRST TIME
A. FILL THE RINSE
AID DISPENSER
RINSE AID DISPENSER
The rinse aid is released during the final rinse to prevent water from forming
droplets on your dishes that can leave spots and streaks. It also improves drying
by allowing water to sheet off the dishes. Your dishwasher is designed to use liq-
uid rinse aids. The rinse aid dispenser is located inside the door next to the deter-
gent dispenser. To fill the dispenser, open the cap and pour the rinse aid into the
dispenser until the level indicator turns completely black. The volume of the rinse
aid container is about 110ml.
FUNCTION OF RINSE AID
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing,
and spot and streak free drying.
ATTENTION
Never fill the rinse aid dispenser with any other substances (e.g. dish-
washer cleaning agent, liquid detergent). This would damage the appli-
ance.
WHEN TO REFILL THE RINSE DISPENSER
The amount of rinse aid can be judged by the color of the optical level indicator
“C” located next to the cap. When the rinse aid container is full, the whole indicator
will be black. As the rinse-aid diminishes, the size of the dark dot decreases. You
should never let the rinse aid get below 1 / 4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indica-
tor changes, as illustrated below.
Full
3/4 full
1/2 full
1/4 full should refill
to eliminate spotting
Empty
C (Rinse-Aid Indicator)
OPENING THE DISPENSER
1
2
3
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
ATTENTION
Clean up any rinse aid spills
during filling with an
absorbent cloth to avoid
excessive foaming during
the next wash. Don't forget
to replace the cap before
you close dishwasher door.