Filter
Top Products
Care and maintenance
CARING FOR THE
DISHWASHER
(cont.)
CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the nozzles, to pre-
vent possible clogging. Wash them under running water and carefully replace them
in their proper position, checking that their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms
under a jet of running water and return them carefully to their position. After
reassembly, check that the spray arms turn freely.
HOW TO MAINTAIN YOUR DISHWASHER
• After Every Wash
Turn off the water supply to the appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
• Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the
socket.
• No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or
abrasive cleaning products. Only use a cloth with warm soapy water. To remove
spots or stains from the surface of the interior, use a cloth dampened with water
with a little vinegar, or a cleaning product made specifically for dishwashers.
• When it is Not in Use
It is recommend that you run a wash cycle with the dishwasher empty and then
remove the plug from the socket, turn off the water supply and leave the door of
the appliance slightly open. This will help the door seals last longer and prevent
odours from forming within the appliance.
• Seals
One of the factors that cause odours to form in the dishwasher is food that
remains trapped in the seals. Periodic cleaning with a damp sponge will prevent
this from occurring.
19