Filter
Top Products
10
Important!
To avoid damaging the appliance, always press the
button (g. 5) to turn o.
Danger of burns!
During rinsing, a little hot water ows from the coee spouts.
Avoid contact with splashes of water.
To turn the appliance o, press the button (g. 5). The
appliance performs a rinse cycle then goes o.
Please note:
If the appliance is not used for an extended period, place the
main switch in the 0 position (g. 6).
Never place the main switch in the 0 position while the
appliance is on.
MENU SETTINGS
When you access the settings menu by pressing the MENU
button, the following menu items can be selected: Descale,
Set language, Energy saving, Cup warmer, Adjust time, Auto-
start, Auto-o, Set temperature, Water hardness, Statistics,
Default values.
Descaling
For instructions on descaling, see page 15.
Setting the language
To modify the language of the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Set language” is
displayed;
3. Press the OK button;
4. Press the or button until the required language is
displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Energy Saving
Use this function to enable or disable “Energy saving” mode.
When enabled, the function reduces energy consumption in
compliance with European regulations.
To enable or disable the function, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Energy saving” is
displayed;
3. Press the OK button. “Disable?” is displayed (or “Enable?”
if the function has already been disabled).
4. Press the OK button to disable or enable the func-tion or
the ESC button a number of times to exit the menu.
When the function is active, if the machine is not used for
about 1 minute, “Energy saving” is displayed.
Please note!
• Toexitthe“Energysaving”mode,rstpressabutton,then
press the button relative to the desired drink.
• Afewsecondsmayelapsebetween“Energysaving”mode
and delivery of the rst drink; “Preparation underway...” is
displayed.
Cup warmer
This function enables the cup warmer to be enabled or disabled.
Proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Cup warmer” is displayed;
3. Press the OK button. “Enable?” is displayed (or “Disable?”
if the function has already been enabled).
4. Press the OK button to enable or disable the func-tion or
the ESC button a number of times to exit the menu.
Warming the cups keeps the coee hot.
Adjust time
To adjust the time on the display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Adjust time” is displayed;
3. Press the OK button. The hours ash on the display;
4. Press the or button to change the hours;
5. Press the OK button to conrm. The minutes ash on the
display;
6. Press the or button to change the minutes;
7. Press the OK button to conrm;
8. Press the ESC button to exit the settings menu.
Please note!
The display shows the time when the appliance is in stand-by
ro the energy saving mode is enabled: if the time is not set, the
display shows “0:00” blinking.
Auto-Start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coee immediately.
Please note!
To enable this function, the time must be set correctly.
To enabled Auto-on, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Enable?” is displayed;
4. Press the OK button. The hours ash on the display;
5. Press the or button to select the hours;
6. Press the OK button to conrm. The minutes ash on the
display;
7. Press the or button to change the minutes;