12
Customising the espresso “my coee” quantity
The appliance is set by default to automatically deliver 30 ml of
espresso “MY COFFEE”.
To modify these settings, proceed as follows:
1. Place a cup under the coee spouts ( g. 10).
2. Press the button repeatedly (g. 8) until “MY
COFFEE” is displayed.
3. Keepthe button (g. 2) pressed until the message
“Program quantity” is displayed. Release the button. The
machine starts making the coee;
4. As soon as the coee in the cup reaches the required level,
press the button again.
The quantity set has now been programmed.
Programming the long “my coee” quantity
The appliance is set by default to automatically deliver about
100ml of LONG “MY COFFEE”. To modify this quantity, proceed
as follows:
1. Place a cup under the coee spouts ( g. 16).
2. Press the button repeatedly (g. 8) until “MY
COFFEE” is displayed.
3. Keepthe LONG button (g. 9) pressed until the message
“Program quantity” is displayed. Release the button. The
machine starts making the coee;
4. As soon as the coee in the cup reaches the required level,
press the LONG button again.
The quantity set has now been programmed.
Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that
delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment knob
(g. 11).
Please note!
The grinding adjustment knob must only be turned when the
coee mill is in operation.
For faster delivery (not a drop at
a time), turn one click clockwise
towards “7” (coarser ground coee).
For fuller bodied creamier coee,
turn one click anticlockwise towards
“1” (ner ground coee).
These adjustments will only be evident after at least 2 cups of
coee have been delivered.
If delivery is still too fast or too slow, repeat the correction,
turning the knob another click.
Tips for a hotter coee
For a hotter coee, you are recommended to:
• beforedeliveringthecoee,performarinsingcycleby
pressing the button to select the “Rinsing” function.
Hot water is delivered from the spout, heating the internal
circuits of the appliance and thus raising the coee
temperature.
• If“Cupwarmer”modehasbeenenabled,placethecups
on the cup warmer until they are warm.
• warmthecupsbyrinsingthemwithhotwater(us-ingthe
hot water function);
• set the “high” coee temperature (llll) in the
menu.
Making espresso coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 12).
2. Place under the coee spouts:
- 1 cup, if you want to make 1 coee (g. 10);
- 2 cups, if you want 2 coees (g. 13);
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 14).
4. Press the button corresponding to the number of coees
required (1 cup or 2 cups ) (g. 2 and 15).
5. Preparation begins. The quantity and taste of coee
selected is displayed together with a progress bar which
gradually lls as preparation progresses.
Once the coee has been made, the appliance pre-pares for
use again.
Please note:
• While the machine is making coee, delivery can be
interrupted at any moment by pressing one of the coee
buttons ( or ).
• Attheendofdelivery,toincreasethequantityofcoee
in the cup, just press (within 3 seconds) one of the coee
buttons ( or ).
Once the coee has been made, the appliance is ready to use
again.
Important!
If the coee is delivered a drop at a time, too fast and not creamy
enough or too cold, read the tips in the “Troubleshooting”
section on page 19.
Various alarm messages could be displayed while using the
machine. Their meaning is explained in the section “Displayed
messages” (page 18).
Making long coee using coee beans
Please note!
When this function is enabled, a long coee similar to drip
coee is obtained.
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container with coee beans (g. 12);
2. Adjust the height of the spout according to the cup used.
Put the cup for long coee under the spouts (g. 16);
3. Press the LONG button (g. 9). Preparation begins.
A progress bar appears on the display and gradually
advances as the procedure progresses.
Once the coee has been made, the appliance pre-pares for
use again.
Please note:
• While the machine is making coee, delivery can be
interrupted at any moment by pressing the LONG button.
• Onlyonecupoflongcoeecanbemadeatatime.
• When delivering more than 125 ml, the appliance
automatically grinds more coee halfway through
delivery.
Making espresso or long coee using pre-ground coee
Important!
• Neveraddpre-groundcoeewhenthemachineisoorit
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than one level
measure or it could dirty the inside
of the machine or block the funnel.
Please note!
If you use pre-ground coee, you can only make one cup of
coee at a time.
1. Press the button. “Pre-ground” ashes on the
display.
2. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 17)
3. Place a cup under the coee spouts.
4. To make espresso coee, press the 1 cup button (g.
2). To make long coee, press the
LONG button (g. 9).
5. Preparation begins. The amount of coee selected is
displayed together with a progress bar which gradually