DeLonghi 5713214281 Coffeemaker User Manual


  Open as PDF
of 21
 
11
8. Press the OK button to conrm. The symbol appears
under “Auto-start” on the display.
9. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol appears next to the clock
to indicate that auto-start has been programmed.
To disable the function:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-start” is displayed;
3. Press the OK button. “Disable?” is displayed;
4. Press the OK button to conrm;
5. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol is no longer displayed.
Auto-O (Stand-by)
The appliance is set by default to go o if not used for two
hours.
The time can be changed so that the appliance switches o
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme Auto-o, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Auto-o” is displayed;
3. Press the OK button;
4. Press the or button until the required time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Auto-o is programmed.
Setting the temperature
To modify the temperature of the water used to make the
coee, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until Set temperature” is
displayed;
3. Press the OK button;
4. Press the or button until the required temperature is
displayed (l = low; llll = high);
5. Press the OK button to conrm;
6. Press the ESC button exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 16.
Statistics function
This displays statistics relating to the machine. To display,
proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until “Statistics” is displayed;
3. Press the OK button;
4. Press the or button, you can check:
- how many coees have been made;
- how many times the machine has been descaled.
- the total number of litres of water delivered.
5. Press the ESC button twice to exit the menu.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the ex-ception of the language
which remains as set).
1. Press the MENU button to enter the menu;
2. Press the or button until “Default values” is
displayed;
3. Press the OK button;
4. The message “Conrm?” is now displayed.
5. Press the OK button to conrm and exit.
MAKING COFFEE
Please note!
A few seconds may elapse between “Energy saving” mode and
delivery of the rst coee.
Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button (g. 7)
repeatedly until the required taste is displayed.
Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee.
To select the quantity of coee, press the
button (g.
8) repeatedly until the message corresponding to the required
quantity of coee is displayed:
Corresponding
coee
ESPRESSO
(ml)
LONG COFFEE
(ml)
MY COFFEE program.
from 20 to 180
program. from
20 to 250
SHORT
≃40 ≃ 125
STANDARD
≃60 ≃ 175
LONG
≃90 ≃ 210
EXTRALONG
≃120 ≃ 250
 previous next