Filter
Top Products
24
Note: In order to receive Trap information, the Switch has to be
configured with Trap IP and Trap Events in the Web browser. These
settings are available in the Trap Setting Menu.
Add Item
To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item
To delete the device in the Monitor List.
Device Setting
You can set the device by using the function key in the Device
Setting Dialog box.
Configuration Setting
In this Configuration Setting, you can set the IP Address, Subnet
Mask, Gateway, Set Trap to (Trap IP Address), System name,
Location, and DHCP setting.
In factory default, the IP address of the DES-1526 will be
atomically assigned from a DHCP server (DHCP enabled). If your
network has no DHCP server, the DES-1526 will fail to get an IP
address, and the DES-1526 will be assigned the default IP address
of 192.168.0.1 with a netmask of 255.255.255.0.
Select the device in the Discovery list or Monitor List and press
this button; then the Configuration Setting window will pop up
(Figure 11). After filling in the data that you want to change, you