A SERVICE OF

logo

Open as PDF
next previous
35
VID: Select the VID group that you set.
When you select VID Table Setting, press “Add new VID” to
create new VID group, from port 01 ~ port 26 (26F), select Untag
Port, Tag Port, or Not Member for each port. To save the VID
group, press the “Apply” button. To remove the selected VID
group, select the VID group and press “Remove the VID” button.
To modify the VID group setting, select the VID group and
change the setting, and press the “Apply” button to save the
settings.
Figure 20. VLAN Settings