Filter
Top Products
29
Login
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure
the manager PC must be set on same the IP network. For example,
when the default IP address of the Web Smart Switch is
192.168.0.1, then the manager PC should be set at 192.168.0.x
(where x is a number between 2 and 254), and the default subnet
mask is 255.255.255.0.
Open the Web browser program and Enter IP address
http://192.168.0.1 (the factory-default IP address setting) to the
address location.
Figure 14.
Or through the Web Management Utility, you do not need to
remember the IP Address, select the device shown in the Monitor
List of the Web Management Utility to settle the device on the
Web browser.
When the following dialog page appears, enter the default
password "admin" and press Login to enter the main
configuration window.