Dynacord MP7 Kitchen Entertainment Center User Manual


 
The frequency ranges as well as the characteristics of the EQ-faders
are designed to meet your day-in-day-out requirements. In case you
intend to have a clear and highly intelligible sound, you might want
to increase the level setting of the 8kHz or 16kHz band a bit. If the
mid-range sounds a bit nasal, try attenuating the mid-band by some
decibels. If you like to provide your sound with more bass, you have
to boost the low frequency range, using the 80Hz or the 250Hz
controls. On the other hand, if the overall sound is undefined with
too much bass, lowering the levels of these two frequency bands
will solve the problem. Especially when using the equalizer, being
aware of the fact that in most cases less can be more is good advice.
47. EQ ON/OFF
This switch activates or deactivates (ON / OFF) the integrated
7-BAND-EQUALIZER.
48. MASTER DISPLAY
The MASTER DISPLAY offers two modes. The PFL/PGM LED (49)
indicates which one is actually selected:
a) MASTER A Level: LED (49) is dimmed. The two LED-chains
indicate the audio level that is output via the MASTER A
OUTPUTS L and R in dBu.
b) PFL/PGM Split: LED (49) lights. This mode is automatically
activated when pressing a PFL-button. The left LED-chain
indicates the PFL-bus level while the right LED-chain indicates
the audio level of the master sum. (please also refer to the
chapter INPUT STEREO)
49. PFL/PGM SPLIT LED
Indicates the master display mode.
50. BAL
This control is for determine the ration of the levels of the left and
right MASTER A output channels. During music playback, it is
recommended to leave the BAL-control at its center position when-
ever possible. In most cases, extreme settings are only useful for
effect purposes.
51. MASTER A FADER
Stereo fader for adjusting the overall volume as well as the output
level of the internal power amplifiers and the MASTER A OUTPUTS.
Please, make sure to close the fader of the corresponding input
channel or at least the MASTER controls before connecting any
audio signal sources. This will save yourself, your audience, and
your equipment from unnecessary stress resulting from plug-in
noise.
MASTER
38