Filter
Top Products
20
Setting Your Preferences
Setting the clock - Time of day
Setting the clock - On or Off
The clock may be set for 12 or 24 hour time of
day operation (see advanced settings section).
The clock has been preset at the factory for the 12
or when the power supply to the range has been
CLO 12:00”. The
clock must be set before the oven can be used.
When power to the unit has been interrupted,
12:00
the Clock in this case, skip step 1 in the example
below and follow steps 2 and 3.
To set the clock (example for 1:30)
1. Press USERPREFuntil you get to the CLO
12:00 menu page.
2. Press 1 3 0 pads to set the time of day to 1:30.
The pads HI or LO can also be pressed to
raise or lower the actual time displayed.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
The oven control can be programmed to display
the time of day or not. The oven has been preset at
the factory to display the time of day.
Changing clock display between ON and OFF
1. Press USERPREFuntil you get to the CLO on
menu page.
2. Press LO or HI to toggle between displaying or
hiding the clock.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
Setting time of day display -
12 or 24 hours
Setting temperature display -
Fahrenheit or Celsius
The oven control can be programmed to display
time of day in 12 hours or 24 hours mode. The
oven has been preset at the factory to display in 12
hours mode.
Changing between 12 or 24 hour time of day
display
1. Press USERPREFuntil you get to the CLO
12hr menu page.
2 Press LO or HI to toggle the display of the
clock in 12 or 24 hours.
3. Press STARTto accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
5. Remember to set your clock after changing the
time of day display mode.
The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in
Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. Press USERPREF until you get to the F-C F
menu page.
2. Press LO or HI to toggle between the °C and
°F display options.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.