Electrolux 318205134 Oven User Manual


  Open as PDF
of 32
 
21
Setting Your Preferences
Setting continuous bake or
12 hour energy saving
The oven control has a factory preset built-in
12 Hour Energy Saving feature that will shut off
the oven if the oven control is left on for more
than 11 hours and 59 minutes. The oven can be
programmed to override this feature for Continuous

Changing between 12 hour energy saving and
continuous bake
1. Press USERPREFuntil you get to the E S
menu page.
2. Press LO or HI to toggle the energy saving
setting on and off.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
Audio control
The Audio Control feature allows the oven
control to be operated without sounds or beeps
whenever necessary. If desired the control can be
programmed for silent operation and later returned
to operating with all the default sounds and beeps.

To change the audio mode or audio volume
1. Press USERPREFuntil you get to the AUd
menu page.
2. Press LO or HI to toggle between the available
volume settings. AUd 5 for the highest volume
setting to AUd 1 for the lowest volume. AUd
OFF to disable the beeps.
3. Press START to accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
Adjusting oven temperature
The temperature in the oven has been pre-set at

follow recipe times and temperatures. If you think
the oven is too hot or too cool, the temperature in

recipe by using a temperature setting that is higher
or lower than the recommended temperature. The
baking results should help you to decide how much

To adjust the oven temperature
1. Press USERPREFERENCESuntil you get to
the UPO menu page.
2. Enter the temperature by pressing theLO or HI

± 35°F.
3. Press STARTto accept the changes and go
back to user preferences menu display.
4. Press CANCEL
the standard oven display.
Re-settingtodefaultfactory
settings
The oven control can be set to return to its original
factory settings. This includes: Setting the Clock
ON/OFF to ON, Setting the clock display mode to


to 5 and Enabling the 12h energy saving mode.

recipes.
To reset the oven control to its original settings
1. Press USERPREFuntil you get to the rSt no
menu page.
2. Press LO or HI to select YES.
3. Press START to reset to default factory
settings.
 previous next