Filter
Top Products
20
A - Burner Cap
B - Burner crown
C - Spark plug
D - Thermocouple
Pan Supports
The pan supports are dishwasher proof. If
washing them by hand, take care when drying
them as the enamelling process occasionally
leaves rough edges. If necessary, remove
stubborn stains using a paste cleaner.
The pan supports can be removed from the hob
to enable better cleaning.
To keep the pan supports in the correct position,
they are fixed on metal pins located in the back
of the hob. After cleaning the hob, ensure the
pan supports are properly placed as shown in
the diagram.
Pay attention when replacing the pan
supports in order to avoid scratching
the glass hob top.
The Burners
Frequently wash the burner caps and crowns
using hot soapy water, and remove marks with a
mild paste cleaner. A well moistened soap
impregnated steel wool pad can be used with
caution, if the marks are particularly difficult to
remove.
After cleaning, be sure to wipe dry with a soft
cloth, then place back the crown and the cap in
their correct position on the burner.
For stubborn stains, use normal non-abrasive
cleaners or specific products available on the
market. NEVER use scouring pads, steel wool or
acids for cleaning.
The ignition system
The electric ignition is obtained through a spark
plug (letter C) and a metal electrode . Keep these
components clean, to avoid difficult lighting,
and check that the burner crown holes are not
obstructed.