Filter
Top Products
38
Building over a kitchen unit
with door
Proper arrangements must be taken in designing
the furniture unit, in order to avoid any contact
with the bottom of the hob which can be heated
when it is operated. The recommended solution
is shown in Fig. 5.
The panel fitted under the hob ("a") should be
easily removable to allow easy access if technical
assistance is needed. See also Fig. 2.
The space behind the kitchen unit ("b") can be
used for connections.
Dimensions are in mm
Building over a unit with an
oven
The recesses for the hob and the oven must
comply the indication given in Figs. 6 and must
be provided with openings to allow a
continuous supply of air.
Two possible solutions to avoid excessive
overheating are described in Fig. 7 and 8.
The electrical connection for the hob and the
oven must be carried out separately, for safety
reasons and also to allow the oven to be easily
removed from the unit, if necessary.
Installation possibilities
a) removable panel
b) space for connections
Fig. 5