Filter
Top Products
29
Electrical connections
Any electrical work required to install this
hob should be carried out by a qualified
electrician or competent person, in
accordance with the current regulations.
THIS HOB MUST BE EARTHED.
The manufacturer declines any liability should these
safety measures not be observed.
This hob is designed to be connected to a 230 V 50 Hz
AC electrical supply.
Before switching on, make sure the electricity
supply voltage is the same as that indicated on
the hob rating plate. The rating plate is located
on the bottom of the hob. A copy is attached on
the back cover of this book.
The hob is supplied with a 3 core flexible supply
cable incorporating a 3amp plug fitted. In the
event of having to change the fuse, a 3amp ASTA
approved (BS 1362) fuse must be used.
Should the plug need to be replaced for any
reason, the wires in the mains lead are coloured
in accordance with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
— Connect the green and yellow (earth) wire
to the terminal in the plug which is
marked with the letter 'E' or the earth
symbol or coloured green and yellow.
— Connect the blue (neutral) wire to the
terminal in the plug which is marked with
the letter 'N' or coloured black.
— Connect the brown (live) wire to the
terminal in the plug which is marked with
the letter 'L' or coloured red.