Electrolux 79902G Range User Manual


 
9
How to turn off a burner
1. To turn off a burner press the relevant Burner
Ignition Touch Control . All the flame
level indicators go off.
The residual heat indicator remains on until
the pan support and the burner have cooled
down.
In case of ignition failure
The hob ignition device generates a series of
small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted. After
3 seconds, the ignition device automatically
repeats the ignition procedure for another 6
seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
indicators flash.
Caution! When the safety device is set
on a burner, the burner controls cannot
be operated for about 60 seconds.
- If touch control is selected, the burner
automatically lights at medium flame level
(three flame level indicators illuminate).
4. To adjust the burner flame level, use the
Increasing or Decreasing Touch
Control.
The residual heat indicator lights up
immediately after the burner is lit.
This means that the cooking zone is getting
hot: the indicator remains on until the pan
support and the burner have cooled down.