Filter
Top Products
10
Your appliance functions
Automatic warm-up function: All cooking zones may be regulated in fourteen stages and
feature an automatic warm-up function.
Using the automatic warm-up function the cooking zone operates for a specific time at
full power and then switches back automatically to the heat setting selected.
The duration of the warm-up phase depends on the heat setting selected.
Direct control of each cooking zone: Each cooking zone is directly controlled via the
appropriate touch control sensor fields.
Error display: for errors lights up in the display when a malfunction occurs on the
appliance (see section „Rectifying faults“).
Child safety feature: With this function the hob can be locked to prevent any
unintentional switching on of the appliance.
Residual heat display: for residual heat will illuminate if the cooking zone becomes hot
enough for there to be a risk of burning.
When the ceramic glass hob is switched off the residual heat display extinguishes only once
the cooking zone has cooled down to the point that there is no longer a risk of burning.
Control panel safety switch-off: Moisture (e.g. a wet cloth) or liquids boiling over on the
control panel immediately switch off all cooking zones.
Hob safety switch-off: If, once the hob is switched on, a heat setting is selected on a
cooking zone within approx. 10 seconds, the hob will switch off automatically.
If one or several sensor fields are pressed for longer than approx. 10 seconds, e.g. by a pot
resting on it/them, the hob will switch off automatically.
Display Description
The appliance is switched on.
-
Heat setting Set cooking zone heat setting.
. Decimal point Set cooking zone intermediate heat setting.
Keep warm function Keep warm function is set.
Automatic warm-up
function
Automatic warm-up function is activated.
Error display A malfunction has occurred.
Residual heat display The cooking zone is switched off but still hot.
Child safety feature Child safety feature is activated.
Safety cut-out is activated.