Filter
Top Products
12
Operating the hob
Before using for the first time
1. Wash down the ceramic glass hob with hot water and washing-up liquid and rub dry
(with a tea towel).
.
2. Switch on the cooking zones briefly one after another to check them.
Touch Control-Sensor fields
In order to operate the Touch Control sensor fields place your finger from above onto the
required field until the corresponding display lights up or extinguishes, and/or the desired
function is carried out.
For faster setting keep your finger on the sensor field until the required value is attained.
Switching on the appliance
To switch on the appliance completely, touch the „ON/OFF“ sensor field .
IMPORTANT!
Damage to the ceramic glass surface.
Aggressive, scouring cleaning agents may damage the ceramic glass surface.
Use only water and washing-up liquid.
IMPORTANT!
Damage to the ceramic glass surface.
Burnt-on stickers and film damage the ceramic glass surface.
Remove stickers and film.
When used for the first time a slight odour may be detected briefly.