Filter
Top Products
17
Chimney Stack
The chimney consists of two sections.
The lower chimney measures 700mm and the upper
chimney (with the recirculation grilles on either side)
measures 415mm. The overall installed measurement
is min. 810 - max 1050mm.
Fitting the Chimney
• Position the upper chimney section and fi x the upper
part to the frame using the 2 screws 12c (2,9 x 9,5)
provided.
• Similarly, position the lower chimney section and fi x
the lower part to the frame using the 2 screws 12c
(2,9 x 9,5) provided.
Fitting the Hood Body
• Before fi xing the hood body to the frame:
• Remove the grease fi lters from the hood body.
• Remove any activated charcoal fi lters.
• From below, use the 4 screws 12f (M6 x 10)
Electrical Connection
• Being sure that the connector of the feeding cable
is correctly inserted in the socket placed on the side
of the fan.
• Connect the control connector Cmd.
• Connect the lights connector Lux.
• Place the connectors in the junction box 24 and close
it using the two screws 12e (2,9 x 9,5) provided.
• Fix the junction box to the hood body using the two
screws 12c (2,9 x 6,5) provided.
• For the recirculation version, fi t the activated carbon
odour fi lter.
• Replace the grease fi lters.
INSTALLING THE COOKER HOOD
12f
12c
12c
24
12e
Cmd
12c
Lux