Filter
Top Products
7
Before carrying out any maintenance or clean-
ing isolate the cooker hood from the mains
supply.
The cooker hood must be kept clean, as a build
up of grease or fat can be a fi re hazard.
External Cleaning
Wipe the cooker hood frequently with warm
soapy water using a mild detergent.
Never use scouring pads or abrasive cleaners.
Never use excessive amounts of water when
cleaning particularly around the control panel.
Metal Grease Filters
The fi lters are washable and must be cleaned when the
Led S1 lights up or at least every 2 months of opera-
tion, or more frequently for particularly heavy usage.
Remove the metal grease fi lters
one at a time by:
Releasing the catches on the fi lters, the
fi lters can be removed.
The metal grease fi lters should be washed, by
hand, in mild soapy water or in a dishwasher. Allow
to dry completely before replacing.
Alarm signal reset
Switch off the lights and extractor motor.
Press Button T3 for at least 3 seconds, until
the leds start to fl ash.
MAINTENANCE AND CLEANING