Filter
Top Products
15
Installation
INSTALL THE FLUE MOUNTING BRACKET
Ducted and Non-Ducted Hoods
1 Assemble the flue mounting bracket, adjusting outside width as shown. See
Figure 8.
2 Carefully center the mounting bracket directly over the range hood location.
3 Secure the bracket assembly to the ceiling using (2) 4.8x38mm mounting
screws and drywall anchors (Figure 9). Make sure the bracket is pushed into the
corner, tight against the wall and centered over the hood.
FLUE MOUNTING BRACKET
10-7/16”
(265.6 mm)
3.9 x 6 mm
FLAT HEAD BRACKET
SCREWS
4.8x38mm
MOUNTING SCREWS
DRYWALL ANCHORS
Figure 8
Figure 9