Filter
Top Products
Problem Remedy
F11 lights up in the oven display The meat probe contact is not properly inser-
ted into the outlet in the oven
Error code lights up in the oven display (starts with F) Contact your local service centre
Technical Data
Product width 596 mm Oven Rating
Product depth 595 mm Top Heating Element 1000 W
Product height 900 mm Bottom Heating Element 1000 W
Energy Efficiency Class Grill Heating Element 1600 W
Top Oven A Ring Heating Element 1400 W
Bottom Oven A
Induction Hob Rating
The area of the bakingtray (cm
2
)
1488 140 mm Induction Heating
Element
1350/2500 W
180 mm Induction Heating
Element
1700/2800 W
210 mm Induction Heating
Element
2100/3100 W
We reserve the right to make changes. This
appliance meets the requirements of EC Di-
rectives 89/336/EEC and 73/23/EEC.
The availability of a heating element varies
according to the specification of products.
Installation
Warning! Any work required on the
cooker must be carried out by a
qualified expert. The cooker is heavy.
Edges and corners, with which you do
not normally come into contact, can be
sharp. Use gloves when moving the
appliance.
When delivered, the cooker is adjusted to a
bench height of 900 mm. The cooker has a
fixed plinth. Take care when positioning the
cooker that you do not block the ventilation
outlets (behind the cooker and at the top be-
hind the hood), the cooker must not be push-
ed in under a tiled edge or similar. There must
be a clear surface of at least 40 cm on both
sides of the cooker.
Make sure that the cooker cable does not get
crushed when moving the cooker.
Horizontal adjustment
The cooker must be level so that, for exam-
ple, fat spreads evenly in the frying pan. Place
a spirit level or a frying pan containing water
on the ceramic glass plate when you want to
check whether the cooker is level. If neces-
sary, from the front of the plinth, you can ad-
just the cooker wheels and feet by 15 mm.
Use a screwdriver to adjust the rear wheels
and a Polygrip for the front feet.
The anti-tip guard
Warning! The anti-tip guard must be
fitted to prevent the cooker from tipping
over with abnormal loads. The anti-tip
guard only works when the cooker has
been pushed into place.
How you install the ant-tip guard:
electrolux 31