Filter
Top Products
6
Operation
1
Load Dishes
Remove all food scraps and load the dishes.
2
Add Detergent
3
Check Rinse Aid
4
Press the Button
5
Select a Wash Programme
The length of the wash programme will
appear on the electronic display (LCD) on
Prefinished models with LCD controls (shown
below).
6
Select (optional)
7
Check
Ensure there is nothing obstructing the spray
arm. The drain filter must be level with the
filter plate.
8
Start
Close the drawer and press the
button.
9
Finish
The DishDrawer®
will beep six times to
indicate the end of the wash programme. At
the end of the wash programme the drying
fan will continue to run for a set time or
until the drawer is opened. The fan assists
with drying and uses negligible amounts
of energy. It is normal for some water to
remain in the drain filter area after the wash
programme is complete.
1
2,3
4
6
7
8
5