Filter
Top Products
2
Controls (Integrated models and Prefinished models with no LCD)
If you have a double DishDrawer®, each drawer has
its own controls and can run independently of the
other.
Power button
The button turns the DishDrawer®
on or off.
Opening the drawer will automatically turn the
DishDrawer®
on for 30 seconds. To end a wash
programme in mid cycle, press the
button.
Any water in the DishDrawer®
will be pumped out.
Start/Pause button
The button starts a wash programme. Press the button to pause or restart the
DishDrawer®
during a wash programme. When paused, wait for three beeps before opening the
drawer. Forcing the drawer open while in mid cycle may cause damage or injury.
Delay Start
The button also sets the Delay Start feature which can delay the start of a wash programme
from 1 to 12 hours.
To activate Delay Start
1
Press and hold the button until the light above the button turns orange (or purple,
depending on your model).
2
Continue holding the button down until the desired delay time has been reached. The
DishDrawer® will emit audible ‘beeps’ as you hold the
button down, each beep indicates
another hour delay.
3
The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay Start
Press the button.
Lock button /
(optional)
The / button activates/deactivates the Keylock or the Childlock functions.
Keylock
The Keylock feature disables all the buttons on the DishDrawer®.
To activate, press and hold the
/ button until you hear one beep (3 seconds). The light
above the
/ button is lit when Keylock is activated.
To cancel the Keylock feature, press and hold the
/ button until the light above the /
button disappears.
Integrated badge
Prefinished models with no LCD