Filter
Top Products
26
Fault Codes Possible Causes What to Do
F1
Flood switch has been
activated.
Turn the water and power supply to the
DishDrawer
®
off and call your Authorised
Service Centre.
F2
Motor problem. Call your Authorised Service Centre.
F3
Temperature sensor failed. Ensure water coming in through the inlet
hose is not hotter than 65
o
C. You may
need to install a tempering valve on your
water supply.
F4
Faulty temperature sensor
or element
Call your Authorised Service Centre.
F9
Electronics malfunction. Call your Authorised Service Centre.
U1
Fill Fault 1 Turn the DishDrawer® water supply on.
2 Ensure the spray arm can rotate about
the centre, and if the DishDrawer® is
full of water, it will need to be emptied
manually.
3 Call your Authorised Service Centre.