Filter
Top Products
16
Rinse aid dispenser
We highly recommend the regular use of liquid rinse aid to give the best drying results. Rinse
aid gives a streak free, sparkling clean look to glass and chinaware, in addition it prevents metal
from tarnishing. The rinse aid dispenser is on the inside of the drawer, located underneath the
detergent dispenser. The dispenser holds approximately 50ml of rinse aid.
Filling the rinse aid dispenser
1
Turn the plug anti-clockwise and remove.
2
Pour the rinse aid into the circular opening.
3
Take care not to spill rinse aid into the
DishDrawer®. Any spillages must be wiped
up to prevent excess foaming. Failure to wipe
rinse aid spillages may result in a service call
which will not be covered by warranty.
4
Fit the plug back into the original position.
How much rinse aid to use
The regulator may need adjusting to suit your water conditions. The lowest setting is ‘1’ and
the highest is ‘5’. Refer to Option Adjustments section to adjust the rinse aid setting. If there
is excessive foam at the end of the wash, reduce the setting. If dishes are wet or streaky after
drying, increase the setting.
Rinse aid indicator light
If the rinse aid indicator light is red, refill the dispenser. If the rinse aid indicator light is dimly lit
or not lit at all, there is enough rinse aid for the wash.
Note
Lighter coloured rinse aids will not dim the indicator light as effectively as darker coloured rinse
aids.