Filter
Top Products
7
Replacing the power supply cable
Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. 5).
Open the cable crimp by unscrewing screw “F” (Fig. 6), unscrew the terminal screws and remove
the cable.
Connect the new supply cable, of suitable type and section, to the terminal board following the
diagram in Fig. 4.
230-240 V~ 3095-3370W
230-240 V~ 3600-3830W
E
N
L
1 (L )2
230- 240 V 3 x 1.5 mm
2
A
F
Figure 5 Figure 6
Feeder cable section type HO5RR-F
Figure 4
Electronic
Pyrolytic