Filter
Top Products
16
Installation instructions
FOUR FUNCTION MODELSCERAMIC GLASS COOKTOP MODELS
Levelling the cooker
Important!
Using the supplied adjustable feet is MANDATORY.
For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit directly
on the floor, a plinth, or other support surface.
To fit the adjustable feet:
1
Rest the rear of the cooker on a piece of
packaging, exposing the base for fitting the feet.
2
Screw the four feet to the cooker.
3
Stand the cooker and level it by screwing or
unscrewing the feet with an adjustable spanner.
Use the supplied nuts if necessary. See Figs. 16a-
16d.
Fixing the backguard
Before installing the cooker, assemble the
backguard “B” .
The backguard “B” can be found packed at the
rear of the cooker.
1
Before assembling, remove any protective film/
adhesive tape.
2
Remove the three screws “A” from the rear of the
cooktop.
3
Assemble the backguard as shown and fix it by
screwing the three screws “A”.
Fig. 17 Assembling the backguard
AA
B
Fig. 16a Fitting the
adjustable feet
(supplied with the cooker
in the feet kit)
0
+ 8 mm
+ 8 mm
+ 15 mm
Fig. 16d Levelling the cooker
Fig. 16b Do not use the supplied nuts for height
adjustments between 0 and 8 mm.
Fig. 16c Use the supplied nuts for height
adjustments between 8 and 15 mm.