Filter
Top Products
44
FOUR FUNCTION MODELSSEVEN-FUNCTION MODELS WITH GAS COOKTOP
Cooktop troubleshooting
Problem Possible solutions
A burner does not light. Check the cooker is switched on at the wall.
Check the gas supply valve is turned on and the supply
to the house is working. You should hear the gas when
you turn a burner on.
Check the gas bottle is not empty.
The ignitors may be dirty. Clean them with a
toothbrush and methylated spirits.
The burner parts may not be located properly. Check
the assembly and make sure the burner cap is sitting
at.
My burner ames are yellow or hard
to start.
The burner parts may not be located properly. Check
the assembly and make sure the burner cap is sitting
at.
If you use bottled gas, this may indicate you are getting
near the end of the bottle.
Check the burner parts are clean and dry.
The gas pressure may not be at the correct level.
Check with your service person or installer.
Your cooker may not be set up for the gas you are
using. Check this with your service person or installer.
One of my burners has an uneven
ame.
Check the burner parts are clean and dry. Check the
assembly and make sure the burner cap is sitting at.
The ame goes out at low settings. The gas supply pressure may be low. Check this with
your service person or installer.The low setting may
have been adjusted incorrectly.
Check this with your service person or installer.
If you use bottled gas, this may indicate you are getting
near the end of the bottle.
My burners do not turn down
much (when running on bottled gas
or LPG).
Your cooktop may not have been adjusted correctly.
Check this with your service person or installer.
The ame tips are very yellow. Call your service person to service the cooker.
There are objectionable odours. Call your service person to service the cooker.
The ame appears to lift o the
burner.
Call your service person to service the cooker.