Filter
Top Products
16
DRAW A
GLASS OF BEER
1. Start with a clean beer
glass that has been
wetted in cold water.
Place the glass at a
45º angle, one inch
below the faucet. Do
not let the glass touch
the faucet. Open the
faucet all the way.
2. After the glass has
reached half full,
gradually bring the
glass to an upright
position.
3. Let the remaining
beer run straight
down the middle.
This insures proper
release of CO
2
by
producing a 3/4” to
1” foam head.
4. Close the faucet
completely and
quickly.
DRAW A GLASS OF BEER
USING THE REFRIGERATOR/BEER DISPENSER