Filter
Top Products
5
INSTALLATION
HOW TO INSTALL YOUR OUTDOOR REFRIGERATOR/BEER DISPENSER
■ 120V 60Hz
■ 1800 watt
■ 3 wire outlet
■ 15 amp circuit
AC Interface
ELECTRICAL CONNECTION:
Check serial plate for correct power supply. Use only electrical power supply as specified on your appliance
serial nameplate. Do not use an extension cord!
WARNING!
Do not splash or spray water from a hose onto the refrigerator! Doing so may cause an electrical shock, which may
result in severe injury or death.
GROUNDING METHOD
This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must be
plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable
local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the responsibility and
obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code
and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut
or removed. All UL listed refrigerated products are equipped with this type of plug.
A ground fault circuit interrupter (GFI) electrical receptacle is to be used to supply electrical power to the refrig-
erator for outdoor applications. Contact an electrician if you need to install one to supply electrical power to
your outdoor refrigerator.
POWER REQUIREMENTS:
Note:
The plug shown is for 120V units.
Grounding Type
Wall Receptacle
Power Supply Cord
with 3-Prong
Grounding
Plug
Fig. 02
Fig. 03