Fisher & Paykel AeroTech Oven User Manual


 
9
USING YOUR OVEN
OVEN MODE DIAL & DISPLAY
Turn clockwise to select your desired oven mode.
When the mode is set, the lights and cooling fan will
come on.
TEMPERATURE DIAL & DISPLAY
Turn clockwise to select the oven temperature you
want to cook at. The default setting for the
temperature display is degrees F. Refer to the User
Select Options on page 23 for instructions on how to
change the temperature display settings.
Note: For Double Oven models, controls on the left
are for the upper cavity and controls on the right are
for the lower cavity.
PREHEATING YOUR OVEN
Always preheat your oven when using the following modes: TrueAero, AeroBake, Bake, AeroPastry and Pastry Bake.
Remember to position shelves in the oven before preheating.
When your oven is preheating, your selected cooking temperature is displayed alternately with the actual oven
temperature. When the oven has reached the selected temperature an audible beep will sound and the temperature
display will change from red to green (stainless steel models) or orange to white (Iridium models).
Preheating your oven is not required when using Roast and AeroBroil.
The AeroTech
TM
oven is equipped with a fast preheat function. In TrueAero, AeroBake, Bake, AeroPastry and Pastry Bake it
will heat to 350
o
F / 175
o
C from cold in under 10 minutes and to 450
o
F / 220
o
C in under 15 minutes.
Note: If you want to change the oven mode and/or temperature during operation, turn the oven mode and temperature
dials to OFF and wait for the temperature and mode lights to dim before selecting your new settings. This will reactivate
the preheat function.