Filter
Top Products
Ice Maker Installation
Unpacking
Remove packaging materials
IMPORTANT: Do not remove any permanent instruction labels or the data label on your
ice maker.
Remove tape and glue from your ice maker before using.
•
To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or
glue residue can also be easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners
to remove tape or glue. These products can damage the surface of your ice maker.
7
Control panel
Water inlet
Power cord
Ice scoopWater supply hose
Excessive Weight Hazard
Use two or more persons to move and install ice maker.
Failure to do so can result in back or other injury.
4 Stability supports
(on bottom of unit)
Bracket & screws
for stability supports
(4 sets)