Filter
Top Products
3
TIMER
TIMER
TIMER
TIMER
Setting Kitchen Timer
The KITCHEN TIMER
Timer
On/O
O
ff
pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to “Minumum and Maximum Control Pad Settings” for time amount settings.
To set the Kitchen Timer (example: 5 minutes)
1. Press
Timer
On/O
O
ff
. "0:00" will appear and "TIMER" will flash in the
display (Figure 5).
2. Press the number pads to set the desired time in the display
(example
5
). Press
START
. The time will begin to count down with
"5:00" and "TIMER" will stay in the display (Figure 6). Note: If
START
is not pressed the timer will return to the time of day.
3. When the set time has run out, ":00" and "TIMER" will show in the
display (Figure 7). The oven will beep until
Timer
On/O
O
ff
is pressed.
To cancel the Kitchen Timer before the set time has run out
Press
Timer
On/O
O
ff
twice until the clock displays ":0:00" and "TIMER". The
display will return to the time of day.
Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
The KITCHEN TIMER
Timer
On/O
O
ff
and CLEAN
Clean
pads control the Continuous Bake or 12 Hour Energy Saving features. The
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is
left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous
Baking.
To set the control for Continuous Bake or 12 Hour
Energy Saving features
1. Press and hold
Timer
On/O
O
ff
for 7 seconds (Figure 1). After 7 seconds
"Off 12Hr Off will appear in the display (Figure 2).
2. Press
Clean
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "On 12Hr On" (Figure 3) in the
display indicates the control is set for the 12 Hour Energy Saving
mode and "Off 12Hr Off" indicates the control is set for the
Continuous Bake feature (Figure 2).
3. Press
START
or
Clear
/Off
or wait 5 seconds to accept the change.
(Figure 4; display will return to time of day).
Timer
On/O
O
ff
for 7 seconds
Clean
START
or
Clear
/Off
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
INSTRUCTIONS PRESS DISPLAY
INSTRUCTIONS PRESS DISPLAY
Timer
On/O
O
ff
START
Timer
On/O
O
ff