Filter
Top Products
4
Setting Oven Lockout Feature
The
Clear
/Off
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the Oven from being turned on. It does not disable the interior oven lights.
Clear
/Off
for 3 seconds
Clear
/Off
for 3 seconds
To activate the Oven Lockout feature
1. Press and hold
Clear
/Off
for 3 seconds (Figure 1).
2. After 3 seconds "Off" will appear in the display and a beep will
sound. Once the oven door is locked "LOCK" will appear in the
display (Figure 1).
To reactivate normal oven operation:
1. Press and hold
Clear
/Off
for 3 seconds. A beep will sound. "Off" will
disappear from the display and "LOCK" will stay until the oven door
has completely unlocked (Figure 2).
2. The wall oven is again fully operational (Figure 3).
Consumer Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control Operation features
Figure 1
Figure 2
INSTRUCTIONS PRESS DISPLAY
Figure 3
Setting Silent Control Operation
The START TIME
Start
time
and CLEAN
Clean
pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS PRESS DISPLAY
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press and
hold
Start
time
for 7 seconds. "On bEEp On" will appear in the display
(Figure 4).
2. Press
Clean
to switch between normal sound operation and silent
operation mode. The display will show either "On bEEp On"
(Figure 4) or "Off bEEp Off" (Figure 5).
If "On bEEp On" appears (Figure 4), the control will operate with
normal sounds and beeps. If "Off bEEp Off" appears (Figure 5),
the control is in the silent operation mode.
3. Press
START
or wait 5 seconds to accept the change.
Start
time
for 7 seconds
Clean
START
Figure 4
Figure 5
LOCK LOCK
LOCK
LOCK LOCK
LOCK