Filter
Top Products
8-5
8.2.2 Cabinet Bases, Braces, and Associated Parts (cont.)
ITEM
STANDARD
PART #
EURO-LOOK
PART #
COMPONENT
1 106-1265 Upright Assembly, Left (Use 106-3828 for singles)
2 106-1266 Upright Assembly, Right (Use 106-3829 for singles)
3 200-1651 Support, Cross Cabinet
4 200-1659 Divider, Cabinet
5 200-2293 Brace, Single Station Lower
6 200-3774 Brace, Double Station Lower
7 Brace, Front Horizontal (Use 200-7036 for singles)
200-2331 Two-Station Fryer
200-2296 Three-Station Fryer
200-2733 Four-Station Fryer
200-3590 Five-Station Fryer
8 Brace, Rear Horizontal (Use 200-5356 for singles)
200-2284 Two-Station Fryer
200-2295 Three-Station Fryer
200-2725 Four-Station Fryer
200-3592 Five-Station Fryer
9 200-4422 Support, Contactor Box Right Station 3 or Station 5
10 201-4425 Support, Contactor Box Left Station 4 or Station 5
11 202-4425 Support, Contactor Box Right Station 3
12 200-4423 Support, Contactor Box Stations 3 and 4
13 200-4447 Support, Contactor Box Front to Rear
14 201-5369 Support, Contactor Box Station 2
15 202-5369 Support, Contactor Box Station 1
* 200-6498 Support, Contactor Box (Singles)
16 200-4424 Post, Door
17 810-2346 Magnet, Door
18 200-4786 Support, Oil Return Manifold
19 210-5595 Hinge, Door (Use 210-6862 for singles)
20 210-1490 Bracket, Rear Support
21 900-1224 Bracket, Frypot
22 826-1389 Bolt, ¼-20 X ¾-inch Hex Head (Pkg. of 10)
23 826-1371 Screw, #8 X ½-inch Drill Point Hex Head (Pkg. of 25)
24 826-1330 Screw, 10-32 X ⅜-inch Slotted (Pkg. of 25, used to attach contactor box)
25 826-1376 Nut, 10-32 Keps Hex (Pkg. of 10)
26 826-1374 Screw, #10 X ½-inch Hex Washer Head (Primary cabinet screw) Qty 25
27 809-0417 Nut, ¼-20 Hex Flange (used with item #22)
28 809-0429 Bolt, ¼-20 X 2-inch Hex Head
29 200-5417 Brace, Rear Channel Corner
30 Channel, Base Rear (Use 106-4901 for singles base assembly)
200-5463 Two-Station Fryer
200-5538 Three-Station Fryer
200-5537 Four-Station Fryer
200-5536 Five-Station Fryer
31 824-1131 Channel, Base Side
32 823-4386 Leg, Navy Shipboard (Mounts with Items 27 and 28)
Use Standard part.