H20.5 SERIES ELECTRIC FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
3-7
3.2.4 Constant Oil Temperature Display Mode
1. To program constant temperature display, press the switch.
2. Press the
switch. will appear in the left display.
3. Enter 1, 6, 5, L in that sequence. The cooking oil/shortening temperature will display constantly
in the right display on a full-pot and in both displays on a split-pot.
NOTE: During the product cooking process, the cooking time will not be displayed but timing
will be taking place.
4. To remove the constant oil-temperature display and display the cooking time, repeat Step 2 and
Step 3.
3.2.5 In-N-Out Burger CMIII.5 Programming Specifications
In-N-Out Burger H20.5 fryer computers should be programmed to the following specifications:
4:45
5:00
5:15 5:30
5:45
6:00
4:45
5:00
5:15 5:30
5:45
6:00
Programming specifications
for In-N-Out Burger CM-III.5
(106-1207)
Time (Minutes:Seconds)
There is no "Shake" or "Hold" time programmed for any buttons. "Sensitivity" settings for all
buttons should be "2".