H20.5 SERIES ELECTRIC FRYERS
CHAPTER 3: OPERATING INSTRUCTIONS
3-8
3.3 Fallback Controller (Optional)
If the computer fails, place the fallback controller switch in the "up" ("ON") position (Figure 1). The
fallback controller switch is located inside the fryer door, on the left-side panel, under the
component box. The white light on the front of the control panel will illuminate and the fryer will
operate at a fixed temperature (Figure 2). Have the computer repaired or replaced as soon as
possible.
Figure 1: Fallback Controller Switch Figure 2: Fallback Controller Indicator Light