Filter
Top Products
C141-E124-01EN3 - 116
Bit
Byte
76543210
0 X ‘00’ (Page Code)
100000000
2 X ‘00’ (Page Parameter Length)
3 X ‘02’ (Page Parameter Length)
4 X ‘00’ (Page Code List)
5 X ‘40’ (Logical/Physical Address Conversion)
Figure 3.22 RECEIVE DIAGNOSTIC RESULTS response data: page code list
(2) Logical/physical address conversion
This response data reports the execution results of address conversion specified in the
“Logical/Physical Address Conversion” parameter in the SEND DIAGNOSTIC command in bytes
after byte 4. The format and contents of this response data are shown in Figure 3.23.
Bit
Byte
76543210
0 X ‘40’ (Page Code)
100000000
2 X ‘00’ (Page Parameter Length)
3 X ‘0A’ (Page Parameter Length)
400000
Address Format Before Conversion
500000
Address Format After Conversion
6
7 Logical or Physical Address
13
Figure 3.23 RECEIVE DIAGNOSTIC RESULTS response data: logical/physical address
conversion
Note:
The value of the “Page Parameter Length” field in this response data is a variable length within
the range of [2 + 8n] in the SCSI specifications. For example, If multiple logical data blocks
are located in 1 physical sector, or if 1 logical data block is located in multiple physical
sectors, n address information items are reported as the address conversion results.
In the current IDD specifications, multiple address information items are not reported in this
response data, but the “Page parameter length” always shows X ‘000A.’ However, considering
expanded specifications in the future, the INIT should make it possible to correspond to
variable lengths for the “Page parameter length.”
~
~
~
~
~
~