Filter
Top Products
C141-E124-01EN5 - 10
Table 5.2 Sense and subsense codes (5 of 5)
C
*
Q
*
Name Explanation
Sense
key
45 00 Select/Reselect failure A response wait time-out from the INIT was detected in the
RESELECTION phase.
B
47 00 SCSI parity error A parity error was detected on the SCSI data bus. B
48 00 INITIATOR DETECTED
ERROR message received
The INITIATOR DETECTED ERROR message was received
from the INIT.
B
49 00 Invalid message error An unsupported or inappropriate message was received. B
4C nn Logical unit failed self-
configuration
The IDD's initial setup failed. ('nn' is the Fujitsu unique code
(80 to FF))
4
4D nn Tagged overlapped
command
Before completing one command execution, new command
having the same tag number was issued to the same logical unit.
(nn=queue tag number)
B
4E 00 Overlapped commands
attempted
1) Before execution of an untagged command was completed,
the same INIT issued a new command to the same LUN.
2) Before execution of a tagged command was completed, the
same INIT issued a command to the same LUN with the same
tag. Or, an untagged command was issued when not in the
sense hold state.
B
55 04 Insufficient Registration
Resource
PERSISTENT RESERVATION OUT command is issued from
insufficient device server resource.
5
01 Spindle synchronized The rotational synchronization operation was completed. 65C
02 Spindle not synchronized. Rotational synchronization deviated. 6
5D nn SMART predictive failure SMART related sense data
x
12: The read error rate attribute has reached the failure
threshold.
x
14: The frequency of grown defect allocation attribute has
reached the failure threshold.
x
43: The seek error rate attribute has reached the failure
threshold.
x
56: The spin up time attribute has reached the failure
threshold.
x
64: The remaining alternate sector count attribute has reached
the failure threshold.
x
FF: The drive is in test mode.
0, 1, 6
90 00 Initiator's SCSI ID not
identified
Since the SCSI ID of the INIT was not notified in the
SELECTION phase, the RESERVE, RESERVE EXTENDED,
RELEASE AND RELEASE EXTENDED commands cannot be
executed.
5
C4 nn Drive failure A serious error was detected in the drive's control system. ('nn'
is a Fujitsu unique code (00 to FF)
4
*
C: Sense Code, Q: Sub-sense Code