Filter
Top Products
C141-E124-01EN 3 - 113
SELF-TEST Code Description
0,0,0 Refer to clause (2), Parameter Specification.
0,0,1 The device server shall start its short self-test routine in the background mode.
0,1,0 The device server shall start its extended self-test routine in the background mode.
0,1,1 Reserved
1,0,0 Abort the current self-test running in background mode. This value is only valid if a
previous this command specified a Background self-test function and that function
has not completed. If either of these conditions is not true, then the device server
shall it respond by returning a CHECK CONDTION status.
1,0,1 The device server shall start its short self-test routine in the foreground mode.
1,1,0 The device server shall start its extended self-test routine in the foreground mode.
1,1,1 Reserved