Filter
Top Products
C141-E124-01EN 4 - 3
Error recovery parameters defined in this page descriptor are applicable for the following
commands, except in cases where it is specifically pointed out.
x READ x WRITE
x READ EXTENDED x WRITE AND VERIFY (Write operation)
x READ LONG x WRITE EXTENDED
x SEND DIAGNOSTIC (Write/read test) x WRITE LONG
a. AWRE (automatic write reallocation enabled)
"1" : An "automatic alternate block allocation processing" operation is specified during
execution of a write operation.
"0" : An "automatic alternate block allocation processing" operation is prohibited during
execution of a write operation.
Automatic alternate block allocation processing is explained in Section 5.3.2.
b. ARRE (automatic read reallocation enable)
"1" : An "automatic alternate block allocation processing" operation is specified during
execution of a read operation.
"0" : An "automatic alternate block allocation processing" operation is prohibited during
execution of a read operation.
Automatic alternate block allocation processing is explained in Section 5.3.2.
c. TB (transfer block)
"1" : Data blocks which contain errors that are impossible to correct are transferred to the
INIT during a read operation.