Filter
Top Products
)w
to Set Oven for Cleaning
Quick Reminder:
1.
Prepare the oven
for
cleanin&.
2. Close
the
oven door completely.
3. Press
the
AUTO SELF CLEAN
pad.
4. Press the INCREASE or DECREASE pad
until the desired Clean
Time appears.
If
the
oven is too hot and you start to set
a
clean
cycle, the word “OFF” will appear in the display.
Allow additional time
for
coolin&
before
you try
to set the
cycle.
NOTE: Only one oven at
a
time can be self-cleaned.
1.
Follow
the directions to prepare the oven
for cleaning.
❑
2. Press the AUTO SELF CLEAN pad.
AUTO SELF
CLEAN
A
A
3. Press the INCREASE or DECREASE
pad until the desired Clean Time
@
is displayed.
Clean Time is normally
3
hours. You
can change the Clean Time to anytime
v
@
between 2 and 4 hours, depending on
the amount
of
soil
in
your oven.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time
for
the clean
cycle is set. The words “ON” and “LOCK” will
appear in the display when the door automatically
locks. It
will
not be possible to open the oven door
until the temperature drops below the lock
temperatul”e
and
the
LOCK light goes off.
4. When the LOCK light is off, open the door.
NOTE:
“
The word “door” will be displayed, the word
“LOCK”
will
flash and oven control will
signal
if you set the clean cycle and forget to close the
oven door.
● A
fan
may automatically turn on and off to cool
internal parts. This is normal and the fan may
continue to run even after the oven is turned off.
You can find out when the clean cycle
will be finished by pressing the STOP
TIME button.
To Stop a Clean Cycle
o
1.
Press the CLEAWOFF pad.
2. Wait
until
the oven has cooled below locking
CLEAR
temperature. You will not be able to open the
door right away unless the oven is below the
OFF
locking temperature.
(Cc,ntinueli
nerl
pcige)
31