Filter
Top Products
‘PROBLEM
“F-AND A
NUMBER” FLASH
IN THE DISPLAY
OVEN WILL
NOT WORK
OVEN LIGHT DOES
NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
POSSIB1,l;
CA(JSE
● This is the function
error
code. Press the CLEAWOFF pad. Allow oven to
cool 1 hour.
Place
oven back into operation. If function error occurs again,
disconnect power to the oven and call for service.
● The circuit breaker in your house has been tripped, or a fuse has been blown.
● Oven controls not properly set.
● Light bulb is loose or defective. Tighten
or
replace.
● Pad operating oven light is broken. Call for service.
●
The oven controls are not properly set. See the Broiling section.
● The door not left open to the
broil
stop position as recommended.
● Improper shelf position being used.
● Food is being cooked on a hot pan.
● Cookware is not suited for broiling.
● Low voltage. See the Broiling section.
● Aluminum foil used on the broiler pan grid has not been fhted properly
and slit as recommended.
c
The oven controls are not properly set. See the Baking or Roasting section.
● Shelf position is not correct.
● Incorrect cookware of improper size is being used.
● The oven thermostat needs adjustment. See the Adjust the Oven Thermostat-
Do It Yollrself section.
37