Filter
Top Products
Special features of your oven control.
32
Consumer Support Troubleshooting Tips Care and Cleaning
Operating
Instructions
Safety Instructions
Auto Recipe
™
Conversion (on some models)
When using convection bake, the
Auto Recipe
™
Conversion feature will
automatically convert entered regular
baking temperatures to convection baking
temperatures.
This feature is activated so that the display
will show the actual converted (reduced)
temperature. For example, if you enter a
regular recipe temperature of 350°F and
touch the START pad, the display will show
CON and the converted temperature of
325°F.
To deactivate the feature:
Touch the upper oven BAKE and
BROIL HI/LO pads at the same time
until the display shows SF.
Touch the CONVECTION COOK pad.
The display will show CON ON. Touch
the CONVECTION COOK pad again.
The display will show CON OFF.
Touch the START pad.
To reactivate the feature, repeat steps
1–3 above but touch the START pad when
CON ON is in the display.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is the
choice you want, touch the START
pad.
Touch the CLOCK pad again to change to
the 24-hour military time clock. The display
will show 24 hr. If this is the choice you
want, touch the START pad.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
NOTE: If the clock is in the black-out mode,
you will not be able to use the Delay Start
function.
Tone Volume (on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume.
There are three possible volume levels.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time until
the display shows SF.
Touch the COOK TIME pad.
The display will show 2 BEEP.
This is the middle volume level.
Touch the COOK TIME pad again.
The display will show 3 BEEP. This
is the loudest volume level.
Touch the COOK TIME pad again.
The display will show 1 BEEP. This is the
quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate
the level shown.
Cook and Hold (on some models)
Your new control has a cook-and-hold
feature that keeps cooked foods warm for
up to 3 hours after the cooking function is
finished.
To activate this feature, follow the steps
below.
Touch the BAKE and BROIL HI/LO
pads at the same time until the
display shows SF.
Touch the COOKING TIME pad.
The display will show Hld OFF.
Touch the COOKING TIME pad again
to activate the feature. The display will
show Hld ON.
Touch the START pad to activate
the cook-and-hold feature and
leave the control set in this
special features mode.
START
BROIL
HI/LO
BAKE
+
COOKING
TIME