Filter
Top Products
These vent hoods are designed to be installed onto a
wall. They may be installed beneath a soffit or cabinet.
• Install these hoods 24” Min. to 36” Max above the
cooking surface.
INSTALLATION CLEARANCES
24" MIN.
36" MAX.
Installation Instructions
1 Ft = 0.3 m
1” = 2.5 cm
In this installation the ductwork running from the top
of the hood will be concealed in the soffit or upper
cabinetry.
For this installation, a decorative duct cover is available
to conceal the ductwork running from the top of the
hood. Use of the duct cover requires special
consideration to the installation height above the
countertop. See page 12 for details.
SOFFIT
WALL MOUNT INSTALLATION
SOFFIT INSTALLATION
24" MIN.
36" MAX.
OPTIONAL ACCESSORIES
Duct Cover
A Decorative duct cover is available to accommodate 8
to 10 ft. ceiling heights. The duct cover will expand
from 12” Min. or 24” to 34” Max. height.
• The duct cover conceals the ductwork running from
the top of the hood to the ceiling.
• The duct cover accessory fits both 30” and 36” wide
models. Order the duct cover accessory at the same
time as the vent hood. All accessories should be on
site at the time of hood installation.
Order the correct color to match your model:
JXCHBB - Black, JXCHWW - White,
JXCHCC - Bisque, JXCHSS - Stainless Steel.
2 Wood
Screws
4 Phillips Head
Screws
Ceiling Bracket
2 Baffle Filters
2 Phillips Head
Decorative Screws
2-Piece Duct Cover
With Ceiling Bracket
2 Drip Trays
2 Wall
Fasteners
2 Washers
Commercial Filter Kit
Use this kit to replace supplied filters.
JXBF30SS, Commercial Filter Kit for 30” wide models.
JXBF36SS, Commercial Filter Kit for 36” wide models.
Includes 2 commercial filters and 2 drip trays.
8