Filter
Top Products
Before YouCall ForService...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you maynot need to carl for service.
Possible Causes What To Do
Control signals after You forgot to enter a bake • Press the BAKEpad and desired temperature or tile
enteringcookingtime temperature or cleaning SELF CLEAN STD/LOWpad and desired clean time.
or delay start time.
Food does notbake Oven controls improperly set. * See tire Using the oven section.
or roastproperly
Shelf position is incorrect * See tire Usingtheoven se(tiou.
or the shelf is not level.
Incorrect cookware or * See tire Using the oven section.
cookware of hnproper size
being used.
Oven floor not in place. * Replace tire oven flool:
Oven thermostat needs * See tire Adjust the oven thermostat--Do it yourself[
adjustment, sectiou.
Fooddoesnot Oven controls improperly set. * Make sure you press tire BROILHI/LOpad.
broilproperly
Improper shelf position * See tire Broiling Guide.
being used.
Food being cooked * Use tire broiling, l_an and ,grid that came with your oven.
in a hot pma. Make sure it is cool.
Cookware not suited • Use tire broiling, l)an and ,grid that came with your oven.
for broiling.
The probe is plugged into the * Unplug and remove the probe fl'om the oven.
outlet in the oven.
Aluminum foil used on the * See tire Using the oven section.
broiling pan mad grid has
not been fitted properly mad
slit as recommended.
ha some areas the power • Preheat tire broil eleIHeut fi)l" 10 Iuiuutes.
(voltage) may be low. • Broil tbr tire hm,_est_, period of time recommended in
tire Broiling Guide.
Clockandtimer A fuse ha your home may be • Replace the fl/se or reset the circtfit 1)reaker.
do not work blown or the circuit breaker
tripped.
Oven controls improperly set. • See tire Using the clock, timer and control lockout
section.
Oven light does Light bulb is loose or defective. • Tighten or replace the btdb.
not work
Pad operating light is broken. • Call for service.
26