Filter
Top Products
Cooti~
by~me
TI~
COOK I & II allows you
to microwave for a
Dreset
amount
.
of time using automatic power
level 10 (High), or change power
level automatically.
Power level 10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See your cookbook.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
II
I
Step4:
Touch START. “COOK
TIMEJ’
“POWER 10” and time
counting down show on display.
Step 5: When time is up, the oven
signals and flashes
“End~’
Oven,
light and fan shut off.
Step 6: Open the door.
UsiW
the
~me
Cook II
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here’s how to do it.
Step 1:
Fill a cup 2/3 full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close door.
I
I
How to Change Wwer
bvel
Step
2:
Touch TIME COOK
I
& 11
pad. Display shows “: O“ and
“POWER
10:’
“ENTER COOK
TIME” flashes.
Step 3: Select your time. Touch
1
and
M~UTE
pad for one minute.
Display shows
“1:00”
and “POWER
101’
“COOK TIME” flashes.
Because automatic power level 10
is
recornrnendd
for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see “How to
Change Power Level” at right.)
Step 1:
Place food in oven in
microwave-safe container and close
the door.
Step 2: Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10~’
“ENTER COOK
~E”
flashes.
Step 3: Select your cooking time.
For example, touch 2, 1 and 5
for
two minutes and 15 seconds.
Display shows
“2:E”
and “POWER
10~’
“COOK TIME” flashes.
Step 4: Touch TIME COOK I & II.
Step
5: Set your cooking time.
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step
6: Touch START.
Step
7: “POWER 10” is displayed
and “COOK TIME I“ counts
down.
Step 8: At the end of “COOK
TIME
I;’
the second power level is
displayed and “COOK TIME II”
is shown counting down.
Step
9: When time is up, the oven
signals and flashes
“End~’
The
oven, light and fan shut off.
Step 10:
Open the door.
8
How to Use Auto Start
The Auto
Stirt
feature allows you
to program your oven to begin
cooking at a preset time of
day—
up to a D-hour
delay.
To Use Auto
S@rt
Step 1: Touch
AU~
START pad
(instead of START pad).
Step 2: Enter the time you want
the oven to start. (Be sure your
microwave oven clock shows the
correct time of day.)
Step 3: Enter your desired cooking
program.
Step 4: Touch START pad. The
oven will automatically start at the
desired time.
Questions and Answers
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn’t done. What happened?
A. Since house power
varies due
to time or location, many Time
Cook recipes give you a time range
to prevent overcooking. Set the
oven for minimum time, test the
food for doneness, and cook your
food a little longer, if necessary.
Q. I touched the number pads
and selected my power level. When
I touched START, however, my
oven didn’t come on. Why not?
A. The TIME COOK
I
& 11 pad
must be touched before setting the
number pads or else your oven will
not begin cooking.
Q. I want to cook on a power
level other than High. What do I
need to do?
A. To cook on a power level other
than High, first touch the TIME
COOK pad and set the desired
cooking time. Then touch the
POWER LEVEL pad. “POWER
10” appears on the display panel.
Enter new power level number and
touch START.
Q. Can I interrupt my Time
Cook function to check the food?
A. Yes.
To resume cooking,
simply close the door and press
the START pad. The timer must be
reset for cooking to resume unless
time is remaining on timer.