Filter
Top Products
24
Installation Instructions
Operation Checklist
Double check to make sure
everything in this manual has been
completed. Rechecking steps will
ensure safe use of the cooktop.
Make sure all controls are left in
the OFF position.
Make sure the flow of
combustion and ventilation air
to the cooktop is unobstructed.
The serial plate for your cooktop
is located on the bottom of the
burner box. In addition to the
model and serial numbers, it tells
you the ratings of the burners
and the type of fuel and pressure
the cooktop was adjusted for
when it left the factory.
Recheck Steps:
Double check to make sure
everything in this manual has been
completed. Rechecking steps will
ensure safe use of the cooktop.
When ordering parts, always
include the serial number, model
number and a code letter to
ensure proper replacement parts.
CONVERTING TO LP GAS
(or converting back to natural gas
from LP)—JGP321 model only
This cooktop leaves the factory set for use
with natural gas. If you want to convert to LP
gas, the conversion must be performed by a
qualified LP gas installer.
The conversion instructions and LP orifices
can be found in the accessories bag.
Keep these instructions and the orifices in
case you want to convert back to natural gas.