Filter
Top Products
Cooting
by~me
Time Cook I &II allows you to
Step 5:
When time is up, the oven
Step 7: “POWER 10
7
’ is displayed
microwave for a ~reset amount of
signals
and flashes
“End!’
Oven,
and “COOK TIME I“ counts down.
time using automatic power level
10 (High), or change power level
automatically.
Power level 10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See the cookbook.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1:
Fill a cup 2/3 full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close door.
Step 2:
Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10?’
“ENTER COOK
~E
I“ flashes.
Step 3:
Select your time. Touch
1 and
MIN pad for one minute.
Display shows
“1:00”
and “POWER
10?7
“COOK TIME I“ flashes.
li~ht
and fan shut off.
Step
6: Open the door.
Using the
~me
Cook II
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here’s how to do it.
Step 1:
Place food in oven in
microwave-safe container and close
the door.
SteD
2: Touch TIME COOK I & II.
Dis~lay
shows “: O“ and “POWER
10~’
“ENTER COOK
TME
I“ flashes.
Step
3: Select your cooking time.
For example, touch 2, 1 and 5 for
two minutes and 15 seconds.
Display shows
“2:E”
and “POWER
10?’
“COOK TIME 1
7
’ flashes.
Step 8: At the end of “COOK
TIME
1:’
the second power
level
is
displayed and “COOK TIME II”
is shown counting down.
Step
9: When time is up, the oven
signals and flashes
“End~’
The
oven, light and fan shut off.
Step 10:
Open the door.
Questions and Answers
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
wasn’t done. What happened?
A. Since house power varies due
to time or location, many time
cooking recipes give you a time
range to prevent overcooking. Set
the oven for minimum time, test the
food for doneness, and cook your
food a little longer, if necessary.
Q. I touched the number pads
and selected my power level. When
I touched START, however, my
oven didn’t come on. Why not?
A. The TIME COOK I & II pad
must be touched before setting the
number pads or else your oven will
not begin cooking.
Q. I want to cook on a power
level other than High. What do I
need to do?
A. To change the power level,
touch the POWER LEVEL pad,
then touch desired number for new
power level.
Q. Can I interrupt Time Cook to
check the food?
A. Yes. To resume
cooking.
Because automatic
Power
level 10
Step 4: Touch TIME COOK I & II.
e.
simDlv
close the door and
uress
is recommended
fo~
this cup of
Step
5: Set your cooking time.
coffee, there is no need to change
the power level. (If power level
-
10
is not appropriate, see “How to
Change Power Level” at right.)
Step
4: Touch START. “COOK
TIME
1;’
“
POWER 10” and time
counting down show on display.
How to Change Power
hvel
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step
6: Touch START.
10
1,
the START pad. The
time;
must be
reset for cooking to resume unless
time is remaining on timer.